Concretes are undoubtedly the best alternative to any other fancy driveway materials. We recommend always working with professionals like fort collins concrete contractors. However, these effectively excellent driveway materials could turn excessively destructive in times of distressing weather.
In terms of quality, concrete can bear it all, but when it comes to being slip-resistant, concretes score awfully bad. Concrete driveways could wreak havoc during rain and storms as they become extremely slippery and thereby pose injury threats.
So, we decided to list some steps to overcome your standard slippery concrete driveways in style.
Adding Decorative additives that create friction
Every driveway could use a decent decorative finish and concrete cutters can help. And if that finish, in turn, adds friction that could drive away your slipping problem, it’s simply icing on the cake. Therefore, we will list some very prevalent decoration additives below that you can easily add to your driveways.
Here we go:
Wood-based floats and brooms
A broom and a float can add an eye-catching finish to your driveway. Plus, it can act as an excellent frictional material at relatively lower costs than any other component. These decorations could be DIYed and or bought. They are universally accessible and finish up a pleasing look.
Addition of rock salt
Rock salt has an image to increase friction profusely. Adding to that valuable Intel, we also want you to know that it is a remarkably attractive solution to your problem. So, you can add rock salt to concrete before pouring the concrete on the surface. After your concrete has settled down perfectly, you will notice a beautiful blend of gray concrete and the patterns of rock salt. This blend will give a flawless texture along with an effective anti-slip property.
Porous Trowel Layers
A trowel can add the right finish to your newly laid concrete driveway. The trowel finishing method is a minimal investment in order to achieve a friction floor that stands against slipping.
Sealed aggregate additions
Aggregates like pebbles and stones could effectively increase friction. Plus, they give out a clear sophisticated finish to a bland concrete driveway. These tiny aggregates are added to settled concrete and laid down in a pattern. After the floor is completely dried, the aggregates give out a gorgeous finish that is suitable for every exterior design.
Layering with silica sand
Silica sand is a well-known slip resistor that can add a valuable touch to your driveway. You can apply silica sand over your protective sealer after the laying of concrete is done. For assurance, you can add two coats. This way, you will achieve a glossy finish alongside a slip-resistant facility.
Improvising existing surface to create an anti-slip environment
All the tips we mentioned above aligns with the fact that your concrete floor is new and unorganized. However, if you possess a pre-existing concrete surface that fails to emit anti-sliding properties, we have a solution.
Your existing concrete surfaces could be coated with traction to create a perfect slip-resistant surface. Here are some ideas:
Painting the surface
You can use paints that contain high contents of anti-slip formulae for your slippery driveways. Some paints are durable enough to stick around your driveways for a long time. This might be a temporary solution, but it indeed does work while it lasts. If your driveways are swift enough to soak up paints and freeze it, this process could work. If not, you may need to look for other options.
Covering the surface in slip-resistant tape
Slip-resistant tapes are a cheap and temporary fix to slipping problems. The slip-resistant tapes are available in a variety of colors that range in shape and patterns. These tapes can be neatly sealed over clean concrete to give out a decent impression and sideline the slipping factor. Apply the tapes over settled concrete around 70 degrees Fahrenheit.
f you are in a climate with snow or icy weather, you will want to look into gritting salt spreaders for your driveway in the winter months, to help prevent accidents such as trips, slips, or falls.
Layering down artificial grass carpets
Grass is a natural anti-slipping component. It is natural, it increases friction, plus it adds the appearance value. Thus, it is evidently the best solution for your slippery driveways. However, low-quality grass carpets have an image of fading out in glaring sunlight, but a good quality carpet is assured to last longer. These grass carpets contain tiny holes that drain out excess water from the driveway, thus protecting any sort of slips caused by water.
Clear grit additives
Clear grit is uncannily similar to our silica sand solution. The only difference here is that silica sand, being real sand extends a raw, cloudy finish to your driveway. But clear grit, as the name suggests, leaves behind a crystal clear finish to your driveway. You can apply it the way you did with silica sand. Plus, a clear grit only demands a single coat too after the settling process.
We hope we were able to clear out every issue that you were eager to know. However, if you feel something is missing, we suggest you check http://concrete-cutting-perth.com.au/ for any further details.
