The duct cleaning Mississauga method that you choose should be able to address all the cleaning issues of your ductwork since each ductwork is unique.
The best air duct cleaning Mississauga method should fit your ductwork system and address all the parts of the interior. Not all ductworks need duct cleaning, but it is necessary to ensure your family breathes clean air and avoid health complications related to dirty air ducts.
The air you breathe in the house passes through the ductwork over five times in a day. Over time, air-borne particles like dust, dirt, and mold are trapped in the duct, and continued accumulation causes these to spread to the entire room. These cause respiratory complications and allergies. It can also cause breathing difficulties for people with asthma. Most ductworks are not easily accessible, so it is hard for DIYs. Contacting a professional to do duct cleaning Mississauga for you will give you better results, take a shorter time, and handle the ductwork with care. See more here about cleaning your air ducts like a pro.
- Cleaning Method for DIYs
Some air ducts are not complicated, and the owners can do a DIY for the cleaning. However, you have to make sure you know how to return each part of the air duct as it was before unbolting. Some simple steps you can follow are;
- Switch off the air duct at the thermostat
- Use a crevicle tool to vacuum the HVAC vents in all rooms
- Remove the vent covers and wash off any dust
- Insert the crevicle tool as far as possible into the ductwork and vacuum all the dust
- Reinstall vent covers
- Best Air Duct Cleaning Method
The best cleaning method will start with the professional, like Duct Kings of Dallas, inspecting your air ducts. You can get a professional cleaner from a reputable duct cleaning company such as Comfort Clean.
When the contractor comes, he will thoroughly inspect all the parts of the duct, including those that were hard for you to reach. The contractor can spot any dust or dirt on the interior of the duct, mold, moisture, insect infestation and any signs of damages.
He will then write a report and recommend the best air duct cleaning Mississauga procedure, considering the dirt and the duct’s structure. These are the four phases that make the best ductwork cleaning method.
- Thorough Check
The first thing the contractor will do is to check the condition of your ductwork to the interior. They do so by removing access plates like end cups and air diffusers. If there are no access points, they make some by cutting a hole in the ductwork. These holes will be sealed after finishing the procedure.
- Dirt Loosening
The dirt, mold and other particles may have accumulated in the duct for years, sticking together. The contractor uses soft-bristled brushes, high-pressure air nozzles and more technology to loosen this dirt inside the vent. Other installed equipment in the HVAC like the AC coil and blower fans also go through this process. The professional makes sure they reach to all areas of the duct and clean them.
- Negative Pressurization
The dust and dirt are not removed immediately after loosening. These contaminants might find their way back if not handled with care. Precautions are therefore taken to prevent this. The professional contractor uses a powerful vacuum that they mount on a truck. They then introduce negative air pressure into the air duct to hold the dust and other dirt while removing it.
- Removal of the Dirt
The last stage in duct cleaning Mississauga. After connecting the vacuum to the ductwork, the removal process begins. Dirt is removed from the access points created on the ductwork. All the dirty air expelled by the vacuum from the air ducts goes through the medical-grade HEPA (high-efficiency particulate air) filters. It is then put in bags and tightly sealed. The contractors dispose of it.
After the procedure, the contactor returns all the removed components. Some make entry paths to the air duct by cutting some parts. These cut parts are completely sealed. They also install new air filters for better performance. The contractor will then turns on your AC to monitor the airflow and keep an eye on the vents.
He should make sure that every component of your HVAC system is working normally before leaving your home. Also, you need to inspect with him to ascertain everything is working.
